Paper Eject Frame Removal - Epson Stylus Color 1520 Service Manual

&2/25
EPSON Stylus 1520
Main Bottom Frame
Engagement of the Edge Guide with the Main Bottom Frame

3.2.10.7 Paper Eject Frame Removal

1. Remove the printer mechanism unit. (Refer to Section 3.2.6.)
2. Disconnect the connector cables for the HP and cover open sensors from the connectors.
3. Remove 3 screws (CBS, M3X6) securing the paper eject frame to the printer mechanism unit.
4. Remove the paper eject frame by releasing the joints.
Screw (CBS 3X6)
;
When removing the paper eject frame, place a clean piece of paper between the platen surface in the
front paper guide assembly and printheads in the CR unit to protect the printheads.
3-22
Figure 3-19.
Paper Eject Frame
Figure 3-20. Paper Eject Frame Removal
WORK POINT
Edge Guide Unit
Screws (CBS 3X6)
Printer Mechanism Unit