EPSON EPL-N3000/AcuLaser M4000N
4.5.6 CLUTCH ASSY PH, CLUTCH REGI
Disassembly procedures for these parts are different between EPL-
C H E C K
N3000 and AcuLaser M4000N. For AcuLaser M4000N, see
P O I N T
CLUTCH ASSY PH, CLUTCH REGI (AcuLaser M4000N)
Removal
1.
Remove the COVER REAR 500. (p.270)
2.
Remove the FUSER ASSY. (p.253)
3.
Remove the COVER REAR. (p.167)
4.
Remove the FAN MAIN. (p.293)
5.
Remove the CHUTE TRANSFR. (p.255)
6.
Remove the 150 FEEDER ASSY. (p.211)
7.
Disconnect the connector (P/J242) of the CLUTCH ASSY PH from the
HARNESS ASSY TRAY 1.
8.
Remove the E-ring retaining the CLUTCH ASSY PH and remove the CLUTCH
ASSY PH from the SHAFT FEED.
9.
Disconnect the connector (P/J243) of the CLUTCH REGI from the HARNESS
ASSY TRAY 1.
10. Remove the E-ring retaining the CLUTCH REGI and remove the CLUTCH REGI
from the ROLL REGI METAL.
Disassembly and Assembly
4.14.4
(p.384).
Figure 4- 44. CLUTCH ASSY PH, CLUTCH REGI Removal
150 Paper Feeder
Note 1)
10)
7)
9)
CLUTCH ASSY PH
CLUTCH REGI
Revision C
8)
219
Confidential