Figure 42: Removing The Center-Mounting Brackets - Juniper TX MATRIX Hardware Manual

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
To remove the mounting brackets from the chassis for a front-mounting, loosen the
1.
screws at the top and bottom of each bracket (see Figure 42 on page 81).

Figure 42: Removing the Center-Mounting Brackets

TX Matrix Switch-Card Chassis (SCC) Description on page 19
Installing the TX Matrix Mounting Hardware for a Four-Post Rack or Cabinet on page 75
Installing the TX Matrix Mounting Hardware for an Open-Frame Rack on page 79
Chapter 7: Installing the TX Matrix Router Mounting Hardware
81