Sonet/Sdh Interface Alarm Messages; Table 26: T640 Router Alarm Messages - Juniper TX MATRIX Hardware Manual

T640 Router Alarm Messages

SONET/SDH Interface Alarm Messages

Copyright © 2010, Juniper Networks, Inc.
Table 25: TX Matrix Chassis Alarm Messages (continued)
Component Alarm Type
Craft interface Yellow
T640 router alarms indicate a problem with a T640 router (LCC) in the routing matrix,
as described in Table 26 on page 211. For a list of additional alarm messages that apply
only to the T640 router, see the T640 Core Router Hardware Guide.
NOTE: The text in the column labeled "Craft Interface Message" appears in
the display of the craft interface. The text in the column labeled "CLI Message"
appears in the output from the

Table 26: T640 Router Alarm Messages

Component Alarm Type
Fans Red
T640 router Red
Yellow
Interface alarms indicate a problem with a specific network interface. For example, Table
27 on page 212 lists the alarm messages for a SONET/SDH interface. These messages
apply only to a T640 router in a routing matrix. For more information about interface
alarms, see the T640 Core Router PIC Guide.
Chapter 23: Troubleshooting TX Matrix Hardware Components
Craft Interface
Message
Craft Failure
show chassis alarms
Craft Interface
Message
T640 Rear Fan Tray in
LCC
LCC lcc-number Hard
Errors
LCC lcc-number Major
Errors
No LCC Online
LCC lcc-number Not
Online
LCC lcc-number Soft
Errors
LCC lcc-number Minor
Errors
CLI Message
Craft Failure
command.
CLI Message
T640 Rear Fan Tray in LCC
LCC lcc-number Hard Errors
LCC lcc-number Major Errors
No LCC Online
LCC lcc-number Not Online
LCC lcc-number Soft Errors
LCC lcc-number Minor Errors
211