Configuring A T640 Router To Be Offline - Juniper TX MATRIX Hardware Manual

Related
Documentation

Configuring a T640 Router to Be Offline

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
NOTE: When you include statements at the
hierarchy level, specify the actual FPC hardware slot number as labeled on
the T640 router. Do not use the routing matrix-based FPC number shown in
Table 23 on page 148.
TX Matrix Software and CLI Overview on page 145
TX Matrix Interface Names Overview on page 147
By default, the Junos OS allows all T640 routers in the routing matrix to come online.
[edit chassis lcc lcc-number]
online-expected;
If you do not want a T640 router to be part of the routing matrix, you can configure it to
be offline. This is useful when you are performing maintenance on a T640 router. If you
do not configure the
offline
is allowed to come online. To configure a T640 router so that it is offline, include the
statement at the
offline [edit chassis lcc lcc-number]
[edit chassis lcc lcc-number]
offline;
When you are ready to bring the T640 router back online, delete the
statement at the [edit chassis lcc lcc-number]
NOTE: If a T640 router does not come online and
are not configured, the TX Matrix router does not generate an alarm.
Optionally, you can configure the TX Matrix router to generate an alarm if the
T640 routers in the routing matrix do not come online by Including the
online-expected
on the TX Matrix router.
TX Matrix Software and CLI Overview on page 145
TX Matrix Interface Names Overview on page 147
statement, any T640 router that is part of the routing matrix
hierarchy level.
hierarchy level.
statement at the
[edit chassis lcc lcc-number]
Chapter 17: Configuring Junos OS
[edit chassis lcc lcc-number]
configuration
offline
and
offline online-expected
hierarchy level
155