Tx Matrix Three-Input 240-A Power Supply Overview; Three-Input 240-A Dc Power Supply Description - Juniper TX MATRIX Hardware Manual

TX Matrix Hardware Guide
Table 14: Two-Input 160-A DC Power Supply LEDs (continued)
LED Color
Blue
DC OK
Related
Documentation

TX Matrix Three-Input 240-A Power Supply Overview

44
State
On steadily
Blinking
Off
TX Matrix Power System Description on page 41
Installing a TX Matrix Two-Input 160-A Power Supply on page 272
Maintaining the Power Supplies on page 203
Troubleshooting the TX Matrix Power System on page 213
TX Matrix DC Power Supply Specifications on page 338
Three-Input 240-A DC Power Supply Description on page 44
Three-Input 240-A DC Power Supply Inputs on page 45
Three-Input 240-A DC Power Supply Load Sharing and Fault Tolerance on page 45

Three-Input 240-A DC Power Supply Description

Each three-input 240-A DC power supply weighs approximately 25 lb (11.3 kg) and consists
of three inputs, three 80-A circuit breakers, a fan, and LEDs to monitor the status of the
power supply. Figure 23 on page 45 shows the three-input 240-A DC power supply in
mode.
2-INPUT
Description
Power supply is installed correctly and is
functioning normally.
Power supply is starting up, is not properly
installed, or is not functioning correctly. One of the
inputs might have failed, or the power supply might
not be receiving sufficient power.
Power supply is not powered on.
Copyright © 2010, Juniper Networks, Inc.