Integrating An Offline T640 Router With The Tx Matrix Router; Overview Of Integrating An Offline T640 Router With The Tx Matrix Router; Tools And Parts Required For Integrating An Offline T640 Router - Juniper TX MATRIX Hardware Manual

CHAPTER 21
Integrating an Offline T640 Router with
the TX Matrix Router

Overview of Integrating an Offline T640 Router with the TX Matrix Router

Tools and Parts Required for Integrating an Offline T640 Router

Copyright © 2010, Juniper Networks, Inc.
Overview of Integrating an Offline T640 Router with the TX Matrix Router on page 179
Tools and Parts Required for Integrating an Offline T640 Router on page 179
Replacing Offline T640 Hardware Components on page 180
Connecting an Offline T640 Router to the TX Matrix Router on page 182
Powering On the T640 Router on page 186
Verifying the State of the Routing Matrix on page 186
Gather the tools and parts required.
1.
See "Tools and Parts Required for Integrating an Offline T640 Router" on page 179.
Replace T640 hardware components offline.
2.
See "Replacing Offline T640 Hardware Components" on page 180.
Connect the offline T640 router to the TX Matrix router.
3.
See "Connecting an Offline T640 Router to the TX Matrix Router" on page 182.
Power on the T640 router.
4.
See "Powering On the T640 Router" on page 186.
Verify the state of the routing matrix.
5.
See "Verifying the State of the Routing Matrix" on page 186.
To connect the TX Matrix router to an offline T640 router, you need the following tools
and parts:
Phillips (+) screwdriver, number 2
Small slotted screwdriver, at least 4 in. long (for the fiber-optic array connectors)
179