Related
Documentation
TX Matrix Alarm Relay Contract Wire Specifications
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Appendix E: Cable and Wire Specifications and Pinouts for the TX Matrix Router
Table 41: DB-9 Connector Pinout (continued)
Pin
Signal
4
DTR
5
Ground
6
DSR
7
RTS
8
CTS
9
RING
TX Matrix Connector Interface Panel (TX-CIP) Overview on page 38
TX Matrix Management Port Cable Specifications on page 345
You can connect the TX Matrix router to external alarm-reporting devices through the
alarm relay contacts on the TX-CIP.
Table 42 on page 347 lists the specifications for the cables that connect to the wires that
connect to the alarm relay contacts.
Table 42: Alarm Relay Wire Specifications
Cable Specification
Wire with gauge between 28-AWG and 14-AWG (0.08
2
and 2.08 mm
)
TX Matrix Connector Interface Panel (TX-CIP) Overview on page 38
TX Matrix Alarm LEDs on the Craft Interface on page 36
Direction
Description
–>
Data Terminal Ready
—
Signal Ground
<–
Data Set Ready
–>
Request To Send
<–
Clear To Send
<–
Ring Indicator
Cable/Wire
Supplied
No
Maximum
Length
None
347