Tx Matrix General Electrical Safety Guidelines; Routers; Grounded Equipment Warning - Juniper TX MATRIX Hardware Manual

Related
Documentation

TX Matrix General Electrical Safety Guidelines

General Electrical Safety Warnings for M Series, MX Series, and T Series Routers

Grounded Equipment Warning

Copyright © 2010, Juniper Networks, Inc.
Appendix A: Safety and Regulatory Compliance Information for the TX Matrix Router
General Safety Guidelines for M Series, MX Series, and T Series Routers on page 295
General Safety Warnings for M Series, MX Series, and T Series Routers on page 296
Install the router in compliance with the following local, national, or international
electrical codes:
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code.
Canada—Canadian Electrical Code, Part 1, CSA C22.1.
Other countries—International Electromechanical Commission (IEC) 60364, Part 1
through Part 7.
Evaluated to the TN power system.
Locate the emergency power-off switch for the room in which you are working so that
if an electrical accident occurs, you can quickly turn off the power.
Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.
Carefully look for possible hazards in your work area, such as moist floors, ungrounded
power extension cords, and missing safety grounds.
Operate the router within marked electrical ratings and product usage instructions.
For the router and peripheral equipment to function safely and correctly, use the cables
and connectors specified for the attached peripheral equipment, and make certain
they are in good condition.
Grounded Equipment Warning on page 319
Grounding Requirements and Warning on page 320
Midplane Energy Hazard Warning on page 321
Multiple Power Supplies Disconnection Warning on page 321
Power Disconnection Warning on page 322
WARNING: The router is intended to be grounded. Ensure that the router is
connected to earth ground during normal use.
Waarschuwing Deze apparatuur hoort geaard te worden Zorg dat de
host-computer tijdens normaal gebruik met aarde is verbonden.
319