Tx Matrix Re-600 Leds; Tx Matrix Re-1600 Description - Juniper TX MATRIX Hardware Manual

TX Matrix Hardware Guide
Related
Documentation

TX Matrix RE-600 LEDs

Related
Documentation

TX Matrix RE-1600 Description

28
after logging in, navigate to the Customer Support Center, then to the download page
for Junos OS.
NOTE: The software on a PC Card is loaded only onto the Routing Engine
into which the PC Card is inserted. It is not automatically copied to the
other Routing Engine.
Reset button—Reboots the Routing Engine when pressed.
HD LED.
TX Matrix Host Subsystem Description on page 25
TX Matrix Routing Engine Description on page 26
TX Matrix Host Subsystem LEDs on the Craft Interface on page 37
TX Matrix RE-600 LEDs on page 28
The HD LED indicates activity on the hard drive. It does not necessarily indicate
routing-related activity.
NOTE: The LEDs that report host module status (including Routing Engine
status) are on the craft interface rather than the Routing Engine faceplate.
TX Matrix Host Subsystem Description on page 25
TX Matrix RE-600 Description on page 27
TX Matrix Host Subsystem LEDs on the Craft Interface on page 37
The RE-1600 boots from the storage media in this order: the PC Card in
present), then the PC Card in
then the hard disk.
SLOT 1 (if present), then the CompactFlash card (if present),
(if
SLOT 0
Copyright © 2010, Juniper Networks, Inc.