Replacing A Tx Matrix Tx-Sib; Removing A Tx Matrix Tx-Sib; Figure 113: Installing A Routing Engine; Figure 114: Reinstalling The Routing Engine Cover - Juniper TX MATRIX Hardware Manual

TX Matrix Hardware Guide
Related
Documentation

Replacing a TX Matrix TX-SIB

Removing a TX Matrix TX-SIB

256

Figure 113: Installing a Routing Engine

Figure 114: Reinstalling the Routing Engine Cover

TX Matrix Routing Engine Description on page 26
TX Matrix RE-2000 LEDs on page 32
TX Matrix RE-1600 LEDs on page 30
TX Matrix RE-600 LEDs on page 28
TX Matrix Preventing Electrostatic Discharge Damage on page 298
The TX-SIBs are located in the front of the chassis in slots
weighs approximately 35 lb (15.9 kg). TX-SIBs are hot-insertable and hot-removable.
Removing a TX Matrix TX-SIB on page 256
1.
Installing a TX Matrix TX-SIB on page 259
2.
Five TX-SIBs are installed in the TX Matrix router. When you remove a TX-SIB, traffic
forwarding continues without any degradation as long as four TX-SIBs remain in the
chassis.
through . Each TX-SIB
SIB0 SIB4
Copyright © 2010, Juniper Networks, Inc.