Grounding The Tx Matrix Router; Connecting The Grounding Cable To The Tx Matrix Router - Juniper TX MATRIX Hardware Manual

CHAPTER 12

Grounding the TX Matrix Router

Connecting the Grounding Cable to the TX Matrix Router

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Connecting the Grounding Cable to the TX Matrix Router on page 109
You ground the TX Matrix router by attaching a grounding cable to the chassis. You must
provide the grounding cable. The cable lug is supplied with the TX Matrix router. For
grounding cable specifications, see "TX Matrix Chassis Grounding Specifications" on
page 337.
To ground the TX Matrix router:
Connect the grounding cable to a proper earth ground.
1.
Verify that a licensed electrician has attached the cable lug provided with the TX Matrix
2.
router to the grounding cable.
Place the grounding cable lug over the grounding points on the bottom rear of the
3.
chassis. The left pair is sized for M6 bolts, and the right pair is sized for UNC 1/4-20
bolts.
Secure the grounding cable lug to the grounding points, first with the washers, then
4.
with the screws.
Verify that the grounding cabling is correct, that it is not touching or blocking access
5.
to TX Matrix router components, and that it does not drape where people could trip
on it.
TX Matrix Switch-Card Chassis (SCC) Description on page 19
TX Matrix Chassis Grounding Specifications on page 337
109