Components; Overview Of Testing And Connecting Tx Matrix Fiber-Optic Components; Tools Required For Testing And Connecting Tx Matrix Fiber-Optic - Juniper TX MATRIX Hardware Manual

CHAPTER 16
Testing and Connecting the TX Matrix
Router Fiber-Optic Components

Overview of Testing and Connecting TX Matrix Fiber-Optic Components

Copyright © 2010, Juniper Networks, Inc.
Overview of Testing and Connecting TX Matrix Fiber-Optic Components on page 133

Tools Required for Testing and Connecting TX Matrix Fiber-Optic

Components on page 134
Enabling TX-SIB Fiber-Optic Array Adapter Receivers on page 134
Testing the TX-SIB Fiber-Optic Array Adapters on page 135
Connecting the Fiber-Optic Array Cables to the TX Matrix Router on page 137
Testing the TX Matrix Fiber-Optic Array Cables on page 138
To test and connect the TX Matrix fiber-optic components:
Gather the tools required to test and connect the TX Matrix fiber-optic components.
1.
See "Tools Required for Testing and Connecting TX Matrix Fiber-Optic Components"
on page 134.
Test the TX-SIB fiber-optic array adapters.
2.
See "Testing the TX-SIB Fiber-Optic Array Adapters" on page 135.
Connect the fiber-optic array cables to the TX Matrix router.
3.
NOTE: Do not connect the cables to the T640 routers until instructed to
do so during T640 integration.
See "Connecting the Fiber-Optic Array Cables to the TX Matrix Router" on page 137.
Test the TX Matrix fiber-optic array cables.
4.
See "Testing the TX Matrix Fiber-Optic Array Cables" on page 138.
133