Table of Contents
Advertisement
TX Matrix Hardware Guide
TX Matrix General Installation Safety Guidelines
TX Matrix General Installation Safety Guidelines
TX Matrix Chassis Lifting Guidelines
Installation Safety Warnings for M Series, MX Series, and T Series Routers
Installation Instructions Warning
304
TX Matrix General Installation Safety Guidelines on page 304
TX Matrix Chassis Lifting Guidelines on page 304
Before installing the router, verify that the intended site meets the specified power,
environmental, and clearance requirements.
The weight of a fully configured chassis is about 495 lb (225 kg). Observe these guidelines
for lifting and moving the TX Matrix router:
Do not attempt to lift a fully configured router by yourself. Using a mechanical lift to
maneuver the router into a rack is recommended. If a lift cannot be used, a minimum
of four people lift the router, and you must remove components from the chassis before
lifting.
Before lifting or moving the router, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
Observe the following warnings before and during router installation:
Installation Instructions Warning on page 304
Rack-Mounting Requirements and Warnings on page 305
Ramp Warning on page 308
WARNING: Read the installation instructions before you connect the router
to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Troubleshooting
