Table 29: Tools And Parts Required For Component Replacement - Juniper TX MATRIX Hardware Manual

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.

Table 29: Tools and Parts Required for Component Replacement

Tool or part
7/16-in. (11 mm) nut driver or socket wrench
Blank panels (if component is not reinstalled)
Dust covers
Electrostatic bag or antistatic mat
Electrostatic discharge (ESD) grounding wrist
strap
Small slotted screwdriver, at least 4 in. long
Flat-blade (–) screwdriver, 2.5 mm
Phillips (+) screwdriver, number 1
Phillips (+) screwdriver, number 2
Wire cutters
TX Matrix Preventing Electrostatic Discharge Damage on page 298
Chapter 24: Replacing TX Matrix Hardware Components
Components
Power cables
Power supply
TX-CB
Routing Engine
TX-SIB
Fiber-optic array cables
TX-CB
Routing Engine
TX-SIB
All
Fiber-optic array cables
Serial cable to
AUXILIARY
Engine ports
Craft interface
Air filter (front or rear)
Cables and connectors
TX-CB
TX-CIP
Fan tray (front or rear)
Power supply
Routing Engine
TX-SIB
Power cables
Power supply
or Routing
CONSOLE
225