Table of Contents
Advertisement
CHAPTER 4
Overview of TX Matrix Router Installation
TX Matrix Router Installation Overview
Copyright © 2010, Juniper Networks, Inc.
TX Matrix Router Installation Overview on page 55
It is important to proceed through the installation process in the following order:
Review all the safety guidelines and warnings for the TX Matrix router.
1.
Prepare your installation site.
2.
See "Overview of Preparing the Site for the TX Matrix Router" on page 57.
Unpack the TX Matrix router and verify the parts received.
3.
See "Overview of Unpacking the TX Matrix Router" on page 69.
Install the mounting hardware. The TX Matrix router can be installed in a four-post
4.
rack or cabinet or an open-frame rack.
See "Installing the TX Matrix Mounting Hardware for a Four-Post Rack or Cabinet" on
page 75 or "Installing the TX Matrix Mounting Hardware for an Open-Frame Rack" on
page 79.
Install the TX Matrix chassis. See "Overview of Installing the TX Matrix Chassis" on
5.
page 83
Because of the TX Matrix router's size and weight—up to 495 lb (225 kg) depending
on configuration—we strongly recommend that you install the TX Matrix chassis using
a lift.
Install the TX Matrix cable management system.
6.
See "Installing the TX Matrix Cable Shelf Assembly" on page 108 and "Installing the
TX Matrix Comb Panel Assembly" on page 107.
Connect the TX Matrix grounding cable.
7.
See "Connecting the Grounding Cable to the TX Matrix Router" on page 109.
Route the TX Matrix fiber-optic array cables.
8.
See "Routing the TX Matrix Fiber-Optic Array Cables" on page 111.
Connect the TX Matrix router to a management console so that you can monitor
9.
powering on the router. Optionally, you can also connect to other external devices.
55
Advertisement
Table of Contents
Troubleshooting
