Unpacking The Tx Matrix Router; Overview Of Unpacking The Tx Matrix Router; Tools And Parts Required For Unpacking The Tx Matrix Router - Juniper TX MATRIX Hardware Manual

CHAPTER 6

Unpacking the TX Matrix Router

Overview of Unpacking the TX Matrix Router

Tools and Parts Required for Unpacking the TX Matrix Router

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Overview of Unpacking the TX Matrix Router on page 69
Tools and Parts Required for Unpacking the TX Matrix Router on page 69
Unpacking the TX Matrix Router on page 70
Verifying the TX Matrix Parts Received on page 71
To unpack the router:
Gather the tools required to unpack the router.
1.
See "Tools and Parts Required for Unpacking the TX Matrix Router" on page 69.
Remove the router, accessory box, and all parts from the shipping crate.
2.
See "Unpacking the TX Matrix Router" on page 70.
Verify that all parts have been received.
3.
See "Verifying the TX Matrix Parts Received" on page 71.
To unpack the TX Matrix router and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Blank panels to cover any slots not occupied by a component
Overview of Unpacking the TX Matrix Router on page 69
Unpacking the TX Matrix Router on page 70
Verifying the TX Matrix Parts Received on page 71
69