Converting A T640 Router; Overview Of Converting A T640 Router - Juniper TX MATRIX Hardware Manual

CHAPTER 19

Converting a T640 Router

Overview of Converting a T640 Router

Copyright © 2010, Juniper Networks, Inc.
Overview of Converting a T640 Router on page 161
Tools and Parts Required for Converting a T640 Routers on page 162
Upgrading the Junos OS in a T640 Router Before Integrating the Router into a Routing
Matrix on page 164
Upgrading the FPC Firmware in a T640 Router Before Integrating the Router into a
Routing Matrix on page 164
Upgrading the Rear Fan Tray in a T640 Router Before Integrating the Router into a
Routing Matrix on page 165
Preparing the T640 Router for Graceful Switchover on page 165
Creating a Configuration File on the T640 Router for Integration into the Routing
Matrix on page 167
Before you integrate a T640 router with the TX Matrix router, you must convert the T640
router by replacing certain hardware and software components.
If your T640 router is not shipped from Juniper Networks with the hardware and software
components required to connect it to a TX Matrix router, you must convert the router by
performing the following tasks:
Upgrade the software to Junos OS release 7.0 or later.
1.
See "Upgrading the Junos OS in a T640 Router Before Integrating the Router into a
Routing Matrix" on page 164.
Upgrade the firmware on the FPCs.
2.
See "Upgrading the FPC Firmware in a T640 Router Before Integrating the Router into
a Routing Matrix" on page 164.
Replace the standard rear fan tray with a different model required to cool the chassis.
3.
See "Upgrading the Rear Fan Tray in a T640 Router Before Integrating the Router into
a Routing Matrix" on page 165.
Integrate the T640 router with the TX Matrix router.
4.
161