About The Documentation; Junos Os Documentation And Release Notes; Objectives - Juniper TX MATRIX Hardware Manual

About the Documentation

Junos OS Documentation and Release Notes

Objectives

Copyright © 2010, Juniper Networks, Inc.
Junos OS Documentation and Release Notes on page xxvii
Objectives on page xxvii
Audience on page xxviii
Documentation Conventions on page xxviii
Documentation Feedback on page xxix
Requesting Technical Support on page xxx
For a list of related Junos OS documentation, see
http://www.juniper.net/techpubs/software/junos/
If the information in the latest release notes differs from the information in the
documentation, follow the Junos OS Release Notes.
To obtain the most current version of all Juniper Networks
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/
This documentation describes hardware components, installation, basic configuration,
and basic troubleshooting procedures for the Juniper Networks TX Matrix Internet
Router(s). It explains how to prepare your site for router installation, unpack and install
the hardware, power on the router, perform initial software configuration, and perform
routine maintenance. After completing the installation and basic configuration procedures
covered in this documentation, see the Junos OS configuration guides for information
about further Junos OS configuration.
NOTE: For additional information about Juniper Networks routers and the
Physical Interface Cards (PICs) they support—either corrections to or
information that might have been omitted from this guide—see the hardware
release notes at
.
.
http://www.juniper.net/ .
®
technical documentation,
xxvii