Converting And Connecting The Control Planes Between An Operational T640 Router And The Tx Matrix Router; Figure 80: Cleaning Tool And Adapter; Integrating An Operational T640 Router With The Tx Matrix Router - Juniper TX MATRIX Hardware Manual

Related
Documentation
Converting and Connecting the Control Planes Between an Operational T640 Router
and the TX Matrix Router
Copyright © 2010, Juniper Networks, Inc.
Chapter 20: Integrating an Operational T640 Router with the TX Matrix Router

Figure 80: Cleaning Tool and Adapter

NOTE: You can order the dry cloth cleaning tool (part number 8037) and
cleaning adapter (part number 8485) from REALM Communications Group.
Call 408-203-5956.
Electrostatic discharge (ESD) grounding wrist strap
Converting and Connecting the Control Planes Between an Operational T640 Router
and the TX Matrix Router on page 171
Integrating the Switching Planes Between an Operational T640 Router and the TX
Matrix Router on page 174
TX Matrix Preventing Electrostatic Discharge Damage on page 298
NOTE: We recommend that you manage the system using a directly attached
management device instead of an out-of-band management device. This
provides you access to the system if its control plane is not functioning.
171