Removing The Tx Matrix Front Air Filter; Installing The Tx Matrix Front Air Filter; Figure 99: Removing The Front Air Filter; Figure 100: Replacing The Front Filter Element - Juniper TX MATRIX Hardware Manual

Removing the TX Matrix Front Air Filter

Installing the TX Matrix Front Air Filter

Copyright © 2010, Juniper Networks, Inc.
To remove the front air filter (see Figure 99 on page 241):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Loosen the captive screws on the corners of the air filter faceplate.
2.
Grasp the handles and pull the air filter straight out of the chassis.
3.
Remove the filter element from the air filter frame (see Figure 100 on page 241).
4.

Figure 99: Removing the Front Air Filter

Figure 100: Replacing the Front Filter Element

To install the front air filter (see Figure 101 on page 242):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Insert the filter element into the air filter frame.
2.
Grasp the air filter by the handles on its faceplate and slide it straight into the chassis.
3.
Tighten the captive screws on the corners of the faceplate.
4.
Chapter 24: Replacing TX Matrix Hardware Components
241