Figure 90: Tx Matrix Control Plane Ports On The Tx-Cip; Removing A Tx Matrix Control Plane Cable - Juniper TX MATRIX Hardware Manual

TX Matrix Hardware Guide

Removing a TX Matrix Control Plane Cable

230

Figure 90: TX Matrix Control Plane Ports on the TX-CIP

Removing a TX Matrix Control Plane Cable on page 230
1.
2. Installing a TX Matrix Control Plane Cable on page 231
To remove a control plane cable:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Copyright © 2010, Juniper Networks, Inc.