Configuring Hwtacacs Authentication Servers; Configuring Hwtacacs Accounting Servers And The Related Attributes - 3Com 5500-SI Configuration Manual

Configuring HWTACACS
Authentication Servers
Configuring HWTACACS
Accounting Servers and
the Related Attributes
Perform the following configuration in HWTACACS view.
Table 673 Configuring HWTACACS authentication servers
Operation
Configure the HWTACACS primary
authentication server.
Delete the HWTACACS primary authentication
server.
Configure the HWTACACS secondary
authentication server.
Delete the HWTACACS secondary
authentication server.
The primary and secondary authentication servers cannot use the same IP address.
The default port number is 49.
If you execute this command repeatedly, the new settings will replace the old settings.
The authentication server can be deleted only when there is no active TCP connection
used for sending authentication packets.
Configuring HWTACACS accounting servers
Perform the following configuration in HWTACACS view.
Table 674 Configuring HWTACACS accounting servers
Operation
Configure the primary TACACS accounting
server.
Delete the primary TACACS accounting server.
Configure the secondary TACACS accounting
server.
Delete the secondary TACACS accounting
server.
The primary and secondary accounting servers cannot use the same IP address. The
default port number is 49.
If you execute this command repeatedly, the new settings will replace the old settings.
Enabling stop-accounting packet retransmission
Perform the following configuration in the corresponding view.
Table 675 Configuring stop-accounting packet retransmission
Operation
Enable stop-accounting packet retransmission
and set the allowed maximum number of
transmission attempts (HWTACACS view)
Disable stop-accounting packet retransmission
(HWTACACS view)
Clear the stop-accounting request packets that
have no response (User view)
By default, stop-accounting packet retransmission is enabled, and the maximum
number of transmission attempts is 100.
Configuring HWTACACS 617
Command
primary authentication ip-address [ port ]
undo primary authentication
secondary authentication ip-address [ port ]
undo secondary authentication
Command
primary accounting ip-address [ port ]
undo primary accounting
secondary accounting ip-address [ port ]
undo secondary accounting
Command
retry stop-accounting retry-times
undo retry stop-accounting
reset stop-accounting-buffer
hwtacacs-scheme hwtacacs-scheme-name