CHAPTER 7
This chapter describes parameter settings of the head module and modules connected to the head module.
Open the setting windows by the following operation.
● Set parameters for the entire network (such as the number of slave stations, link device assignment, reserved station
● Routing parameters, used for communications with other networks, do not need to be set to the head module.
Downloaded from
ManualsNet.com
PARAMETER SETTINGS
Project window
[Parameter]
specification, and temporary error invalid station setting) to the master station. For details, refer to the following.
User's manual for the master/local module used
Communications with other networks are performed according to the routing parameters set to the master station.
search engine
[PLC Parameter]
Double-click.
CHAPTER 7 PARAMETER SETTINGS
7
51