Table of Contents
Advertisement
5. Installing the PCL 6/5e
Installing the PCL 6/5e Printer Driver
This section provides basic procedures for installing the printer driver. The ac-
tual procedure differs somewhat depending on your operating system. Follow
the right one of the procedures below.
We recommend the PCL 6 as your first choice. However, some of your applica-
tion software might require the installation of the PCL 5e printer driver. In this
case, you can install the PCL 5e in addition to the PCL 6.
Important
When you set the print resolution to 300dpi, you should install the PCL 5e
driver.
When you set the printer resolution to 1200dpi, you should install the PCL 6
driver.
When updating the printer driver by installing the latest version, you should
uninstall the former version, if any.
Windows 95/98 - Installing the PCL 6/5e Printer Driver
Installing the printer driver
Follow these steps to install the PCL 6/5e printer driver on your Windows 95/
98 system:
A
Insert the CD-ROM that comes with your printer in the CD-ROM drive.
B
Close all applications that are currently running.
C
Click [Start] on the task bar.
D
Click [Run].
E
In the [Run] window, click [Browse].
F
Select the CD-ROM Drive.
G
Open the folder called [PCL5E] or [PCL6].
H
Open the folder called [WIN31_95].
I
Open the folder of the appropriate language for your operating system.
J
Open the folder called [DISK1].
Printer Driver
31
Advertisement
Table of Contents
