Page 280 of 466
Setting the TTY terminal port
Traditional terminal SDI connection
NN43041-310
Standard 01.11
Configuring a terminal and SDI ports
A TTY terminal can be any standard PC running terminal software, (for
example, HyperTerminal). The TTY terminal port must be configured as:
•
Bits per second - Baud rate must be the same as the speed of SDI port.
•
Data bits - 8
•
Parity- None
•
Stop bit – 1
•
Flow control – None
•
Terminal Emulation- VT100
Figure 121 shows the setup values for a traditional terminal setup.
October 2008