Hierarchical Modular Qos Commands - Cisco NCS 540 Series Routers Command Reference Manual

Hierarchical Modular QoS Commands

Note All commands applicable for the Cisco NCS 5500 Series Router are also supported on the Cisco NCS 540
Series Router that is introduced from Cisco IOS XR Release 6.3.2. References to earlier releases in Command
History tables apply to only the Cisco NCS 5500 Series Router.
This chapter describes the commands used to manage hierarchical modular QoS.
• hw-module profile qos hqos-enable, on page 76
• hw-module profile qos max-trunks (hw-module profile bundle-scale), on page 77
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
75