Show Ipsla Responder Statistics Ports - Cisco XR 1200 series Command Reference Manual

IP Service Level Agreement Commands

show ipsla responder statistics ports

To display the number of probes that are received or handled by the currently active ports on the responder,
use the show ipsla responder statistics ports command in EXEC mode.
show ipsla responder statistics ports
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.3.0
Usage Guidelines
The output of the show ipsla responder statistics port command is available only for specific intervals of
time in which only nonpermanent ports are being used at the responder. The reason is that the responder closes
the nonpermanent ports after each operation cycle. However, if both permanent and nonpermanent ports are
used, the output always contains rows for the permanent ports. The rows for the nonpermanent ports are
displayed only if those nonpermanent ports are enabled at the instant the command is issued.
Task ID
Task ID
monitor
Examples The following sample output is from the show ipsla responder statistics port command:
RP/0/0/CPU0:router#
Port 12709
Port 12213
Port 55690
This table describes the significant fields shown in the display.
OL-24735-01
show ipsla responder statistics port
Local Address ...
Local Address ...
Local Address ...
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
show ipsla responder statistics ports
Modification
This command was introduced.
Operations
read
NumberOfProbes 2
NumberOfProbes 1
NumberOfProbes 376
233