Show Ip Dhcp Snooping - Cisco 4500M Command Reference Manual

show ip dhcp snooping

show ip dhcp snooping
To display the DHCP snooping configuration, use the show ip dhcp snooping command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EW
Examples
This example shows how to display the DHCP snooping configuration:
Switch# show ip dhcp snooping
Switch DHCP snooping is enabled
DHCP snooping is configured on following VLANs:
5 10
Insertion of option 82 is enabled
Interface
--------------------
FastEthernet6/11
FastEthernet6/36
Switch#
Related Commands
ip dhcp snooping
ip dhcp snooping information option
ip dhcp snooping limit rate
ip dhcp snooping trust
ip dhcp snooping vlan
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-300
show ip dhcp snooping
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Trusted
-------
no
yes
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Rate limit (pps)
----------------
10
50
78-16201-01