Porsche 996 TT Repair Manual page 1722

No. Procedure
1 Removing control module
and cover
2 Removing switch for seat
adjustment
3 Disconnecting wiring
harness
3a Removing wiring harness Remove wiring harness −7− from the cushion carrier; to do so,
4
Removing front cushion carrier
einordnung
Instructions
Lift both holders of the cover −1− in −direction of arrow A− and
remove to the front.
Unscrew the fastening screws −2− , position control module so
that the plastic clips −9− are exposed.
Unscrew fastening screw −4− from the switch for the seat
adjustment −5− . Pull the switch upwards and pull to the front
−arrow− . Subsequently remove through the opening of the
cushion carrier −direction of arrow− .
Disconnect electrical plug connection of the seat heating, unclip
the lines from the metal clips −6− along the seat rail.
press the locking tabs −arrow− and pull out of the cushion
carrier.
1659