Fitting Front Transmission Case Cover; Fitting Cover; Tightening Torques - Porsche 996 TT Repair Manual

Fitting front transmission case cover

Fitting cover

1. Coat front transmission case cover with Loctite 574, put on and screw in fastening
screws.
Tightening torque: 23 Nm (17 ftlb.)
2. Fit the oil pump. To do this, drive in oil pump with a rubber hammer and screw in
screws.
Tightening torque: 23 Nm (17 ftlb.)
3. Fit oil cooler. To do this, screw in hexagon socket head bolt −A− and two hexagon−head
bolts−B− .
Tightening torque for hexagon socket head bolt: 10 Nm (7.5 ftlb.)
Tightening torque for hexagon−head bolt: 23 Nm (17 ftlb.)
4. Fit connecting hose for oil cooler housing.
5. Fit electric cable.
6. Fill with transmission oil. ' 34 01 55 Change transmission oil.
7. Remove transmission from assembly support and fit onto the engine. ' 34 35 27 Removing and
refitting the transmission

Tightening torques

Location
Fastening screws of front transmission case cover
Oil pump fastening screws
Hexagon socket head bolt of oil cooler
Hexagon−head bolt of oil cooler
Fitting front transmission case cover
einordnung
Thread
M 8
M 8
M 6
M 8
996840, 996841
Tightening torque Nm (ftlb.)
23
23
10
23
1951