Porsche 996 TT Repair Manual page 1925

1. Insert release lever into the release bearing and fix in installation position with suitable adhesive tape.
2. Insert closure cap for the pulse sender opening in the correct position in the transmission housing
and mount transmission on the engine.
3. Ensure that the closure cap −A− is properly seated and positioned.
4. Fit release lever shaft with sealing rings.
1 Hexagon−head bolt
2 Holder
3 Bearing cover
4 Needle−roller bearing with assembly bore
5 Sealing ring
6 Clutch control shaft
7 Release lever
Refitting transmission
einordnung
1862