Installing Front Abs Lead - Porsche 996 TT Repair Manual

Installing front ABS lead

1. Position socket in installation position and secure using fastening screw
−1− .
=> Tightening torques
2. Insert both plugs −arrow A− .
3. Fold back lead lock −arrow B− until it can be felt to engage on the
plugs.
4. Press the lead into the holders −arrow A− by inserting the rubber
sleeves.
5. Secure lead for headlight beam adjustment to the ABS lead using fabric tape −B− .
6. Position the lead in installation position −arrows C− and close the clips −arrows D− .
7. Push the lead through to the interior −arrow
E− .
Note
Choose the connection point at a position with sufficient room for connecting all the individual leads.
•
Installing front ABS lead
einordnung
1954