Fitting Six−Point Seat Belt Gt2 - Porsche 996 TT Repair Manual

Fitting six−point seat belt
1. Loop technique for fastening
the seat belt to the bucket seat
cross member
Loop the belt strap in the direction of the arrow −inset− around the bucket seat transverse strut into the
adjustible slider. The projection −dimension = X− of the belt strap must be at least 100 mm.
2. Pulling six−point seat belt through the openings in the bucket seat
Pull six−point seat belt through the upper openings in the backrest from behind −arrow A− and
through the openings in the seat frame from the side −arrow B− .
3. Fitting belt fitting
Position foam part −4− and belt fitting −5− at the left and right on the seat frame. With the shim −3−
and the fastening screw −2− , screw the belt fitting −5− tight. Position the cover −1− on the fastening
screw −2− .
Use the foam part −4− for the Club Sport
version.
For the Cup racing version, mount the bushing −6− instead of the
foam part.
Tightening torque: 50 Nm (37 ftlb.)
Fitting six−point seat belt
einordnung
GT2
GT2 1996