Porsche 996 TT Repair Manual page 2081

Removing the folding wall
from the cover
4 Removing the lower part of the
spoiler
5 Removing hinge
Disassembling rear lid
einordnung
Press out the clamping washer −7− with a screwdriver. The
clamping washers are destroyed by the action of removing
them.
4. Remove the fastening rail −8− and the folding wall −6− from
the cover towards the rear.
5. => Removing and installing additional brake light
6. Unscrew the fastening nuts −9− from the upper part of the
spoiler and the hinge −11− . Remove the threaded plate −10−
.
7. Unscrew the fastening screws −12− from the lower part of the
spoiler and the actuating element. Remove the position spacer
−13− .
Unscrew fastening screws −14− from the hinge −11− .
2018