Porsche 996 TT Repair Manual page 2051

DANGER
Re−tighten with correct tightening torque!
• Carry out a test drive after performing assembly work on the roll−over bar/spring strut mount
threaded parts on the body and then re−tighten the fastening nuts −7− with the correct tightening
torque!
Note
• Initially screw in and centre all the fastening screws and fastening nuts only in the sections −A, B, D,
E− and in the base cage −C− . Only then tighten the threaded parts with the prescribed tightening
torques. Adjust the adjusting element −2− last.
Installing the roll−over bar
einordnung
1988