Bedding In The Brake Pads - Porsche 996 TT Repair Manual

5. Fit new expanding spring, new retaining pin and new retainer (safety bracket) −arrow− ! These
parts are available as a repair set and must be renewed each time the pads are changed!
6. Insert the warning contact wire and warning
contacts.
7. Firmly press the brake pedal several times to position the brake pads on the brake discs.
8. Check and, if necessary, correct the brake fluid
level.

Bedding in the brake pads

• New brake pads require a slightly longer bedding−in period for PCCB brake discs than cast iron brake
discs.
• In general, the following applies: New brake pads must be worn in (bedding−in period), their
optimum braking effect is therefore not reached until after a few hundred kilometers. The slightly
reduced braking effect must be compensated for by increased pressure on the brake pedal. The same
also applies after a brake disc change.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Bedding in the brake pads
einordnung
1922