Porsche 996 TT Repair Manual page 1512

3 Fitting door brake Screw the door brake to the body with the fastening screw.
4 Connecting
electrical plug
connection
996420, 996421, 996450, 996451, 996430, 996431, 996840, 996841
57 51 19 Removing and installing door
Use special tool ' No. 9666, 2.4 (angle screwdriver) to counter.
Tightening torque: −23 Nm (17 ftlb.)−
Connect electrical plug connection.
Attention: locking tabs in the plug can break off!
Press in the securing latch of the plug connection −B− . Push the whole plug
connection into the A−pillar. Press the plug down approx. 3 mm, so that the
locking tab −C− engages in the retaining bracket. Then screw the Torx
fastening screw (T20) tight.
Tightening torque: −2.5 Nm (2.0 ftlb.)−
einordnung
1449