Installing Rear Power Windows (Cabriolet) - Porsche 996 TT Repair Manual

3 Closing side window
4 Releasing power window Release adjusting elements with the adjustment tool −7− . To do
CAUTION
Damage to or destruction of the convertible top when the convertible−top support is removed!
• The convertible top must no longer be electrically operated when the convertible−top support is
detached.
No. Procedure
5 Detaching
convertible−top
support
6 Removing power
window
top of page

Installing rear power windows (Cabriolet)

Installing rear power windows (Cabriolet)
Press the micro−switch −4− in the windscreen frame and actuate
the rocker switch −5− at the same time.
this, loosen and unscrew the nuts −6− from the adjusting element.
Adjustment tool for the rear power window. => Tools and
materials
Instructions
Undo fastening screws −2− and fastening nuts −8− from the convertible−top
support −10− , pull the deflection fitting and belt guide section −9− up and
out. Pull convertible−top support −10− inward and fix between B−pillar and
the convertible−top support with a spacing block −12− dimension −A = 30
mm− .
Push rear power window −11− upward, push both locking tabs of the
electrical connection −13− outward and disconnect.
einordnung
1485