Installing Clutch; Tightening Torques - Porsche 996 TT Repair Manual

Table of Contents

Advertisement

2. Position the toothed segment P201b −A− on the stud and undo the pan−head screws in several
stages and in diametrically opposite sequence, to avoid deforming the thrust plate.
top of page

Installing clutch

1. Fit drive plate with centring mandrel, special tool centring mandrel 9102 in the guide bearing (needle
bush).
2. Fit thrust plate. To do so, position the special tool toothed segment P201b −A− on the stud and
tighten the pan−head screws in several stages and in diametrically opposite sequence.
Tightening torque: 23 Nm (17 ftlb.)
3. Remove the special tool centring mandrel 9102 .
4. Remove the special tool toothed segment P201b .
5. Refit transmission. ' 34 35 27 Removing and refitting the transmission.
top of page

Tightening torques

Location
Pan−head screws thrust plate − ZMS
Removing clutch
einordnung
Thread
Tightening torque Nm (ftlb.)
M8
996840, 996841
23 (17 ftlb.)
1856

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents