Porsche 996 TT Repair Manual page 1818

Limited functionality of the rain sensor when the following information points are not observed:
Note
• An adhesive pad must be used when reinstalling the rain sensor. See PET, main group 9, sub group
04.
When assemblying the adhesive pad, air should not be trapped between the windscreen and the
•
adhesive pad or between the adhesive pad and the rain sensor.
• When installing the adhesive pad, a temperature of approx 20°C for the windscreen, the rain sensor
and the adhesive pad must be ensured. Carefully heat the windscreen with a hot−air gun for example.
• The sensor on the sticking surface must not be touched by fingers.
• If the sensor is new, remove the protection cap before the sensor is stuck onto the windscreen.
Removing rain sensor
einordnung
1755