Porsche 996 TT Repair Manual page 1821

Note
Observe notes: => Removing rain sensor
•
• If the removed rain sensor is reinstalled, the surfaces must be free of adhesive residues. Do not use
harsh cleaning agents. Stick the adhesive pad onto the rain sensor at a temperature of approx. 20°C.
No. Procedure
1 Sticking on rain sensor
2 Clip in holder
3 Push on rearview mirror
4 Pushing on plug
5 Inserting orientation lights Inserting orientation lights −2− into the cover.
Installing rain sensor
einordnung
Instructions
Push the rain sensor −6− onto the windscreen.
Push and press holder −5− onto the rain sensor until it engages.
Push rearview mirror −4− onto the mirror holder from below.
Join the plug connection −3− and insert into the mirror base.
1758