Porsche 996 TT Repair Manual page 2099

4. Install closure cap.
j. Reinstall the closure cap −arrow− beside the oil extraction pump on the cylinder
bank 1 to 3.
k. Lightly coat the O−ring with acid−free
grease.
l. Press in the closure cap −arrow− evenly by
hand.
m. Ensure that the fastening holes
overlap.
n. Tighten the three fastening
screws.
Tightening torque: 10 Nm (7.5 ftlb.)
5. Bleed coolant circuit
Bleed the coolant circuit carefully. To do this, lift the bow on the closure
cap.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Installation overview of the coolant regulator
einordnung
2036