Porsche 996 TT Repair Manual page 1839

No. Procedure Instructions
1 Connecting the Connect the connection lines −C− and the positive lead B+ −B− to the current
connection lines distributor in the correct order. Fasten the lines to the current distributor with the
tie−wrap −9− .
Use the marking, the wiring diagram and new nuts.
M 6 tightening torque: 8 Nm (6 ftlb.)
M 8 tightening torque: 15 Nm (11 ftlb.)
2 Closing and Close the cover until both locking elements −arrow− engage. Affix the service
sealing the label −8− −red− .
current
distributor
3 Installing the Check the flange seal between the current distributor and the firewall for
current damage and replace, if necessary. Push the current distributor −A− into place
distributor between the heating/air−conditioning unit and the firewall. Move the current
distributor in the −direction of the arrow− until the studs of the current
distributor −A− fit into the firewall.
Installing the current distributor
einordnung
1776