Porsche 996 TT Repair Manual page 1781

6. Select Coding with the cursor keys and press the >> key.
7. If possible, select the coding, read it out and note it down if necessary.
8. Switch off ignition and replace the PCM2. => Removing display and operator control unit (PCM 2)
9. Switch on ignition. After replacement of the PCM2, go back to the PCM2 MMI menu using the >> key.
10. Select PCM2 code in the Coding menu and press >> to continue.
11. Enter the IPAS PCM2 code and code it with the F8 key.
12. Follow the instructions on the Tester.
Note
• In the case of a new PCM2, continue with Step 13.
In the PCM2 MMI menu:
13. Select Coding and press >> .
Note
• The following can be coded with software version 20.0 or higher.
14. Select K−number, standard and code with the F8 key.
Turbo RoW
RoW
Turbo USA
USA
15. Select K−number, real and code with the F8 key.
K−number, real:
Turbo RoW
RoW
Turbo USA
USA
16. Select Country coding , choose the relevant country and code with the F8 key.
17. Select Vehicle type vehicle coding and code with the F8 key.
Vehicle type vehicle coding
Not coded
911 (996)
Boxster
Cayenne
18. Select Vehicle version vehicle coding and code with the F8 key.
Vehicle version vehicle coding
Teaching display and operator control unit (PCM 2)
einordnung
K−number, standard:
3900
3967
3984
4010
3900
3967
3984
4010
1718