Removal - Porsche 996 TT Repair Manual

• When fitting the vibration dampers on the small pistons, the cut−out on the vibration damper
−arrow− is to be positioned at the brake pads guide pins as otherwise the vibration damper will be
deformed!
top of page

Removal

CAUTION
PCCB (Porsche Ceramic Composite Brake): Danger of material damage during wheel removal/installation
(danger of damage to brake discs)!
• Use assembly aids (assembly pins) in order to exclude any possibility of heavy contact of the wheel
with the brake disc! The assembly aids (2 assembly pins) are located in the luggage compartment!
1. Screw the 2 assembly aids (assembly pins), instead of 2 wheel bolts, into the wheel hub before wheel
removal/installation. During removal, first remove the three remaining wheel bolts and remove the wheel
carefully, without touching the brake discs.
Removal
einordnung
1915