Disassembling and assembling front spring strut
No. Designation
Qty. Removal
1
Fastening nut
1
M 14 x 1
2
Assembly of
1
spring strut
mount
3
Spring mount 1
Disassembling and assembling front spring strut
If necessary, pre−tension with the spring clamp
before loosening the fastening nut. This depends
on the adjustment (pre−tension) of the coil
spring. Support at the piston rod with a
countering tool Sonderwerkzeug 9630 or a 7 mm
Allen key when loosening the nut.
Remove complete assembly (consisting of No. 8
/ No. 9 / No. 10 / No. 11).
einordnung
GT2
GT2
Installation
Use new fastening nut.
Grease thread of the piston
rod with Optimoly HT
(copper paste). Tighten to
80 Nm (59 ftlb.)
The spring strut mounts for
the right and left sides are
identical parts.
1838