Replacing The Model Logo; Test And Adjustment Values - Porsche 996 TT Repair Manual

top of page

Replacing the model logo

1. Find the middle of the lid.
2. Position logo −Carrera− with the dimensions −A = 185 mm− and −B = 31 mm− on the rear lid and
affix.
3. Position logo −S− with the dimensions −C = 185 mm− and −B = 29 mm− on the rear lid and affix.
4. Insert logo −4− in the external cut opening −arrow− of the logo −S− .
top of page

Test and adjustment values

Note
• Illustration of the gap dimensions => Gap dimensions, body rear – Carrera 4S
Designation
Rear lid to rear trim
Rear lid to tail light
Rear lid to outer side
Removing and installing wiring harness
einordnung
Dimension
5 ±2 mm
−H−
+0.5
−J− 2.2 mm Rear lid only lowered
−1.5
−K− 5 ±2 mm
+0.5
1.8 mm Rear lid only lowered
−L−
−1.5
−M− 4.5 ±1 mm Tail light only lowered (max. 1 mm)
−N− 4.5 ±1 mm Rear lid only lowered (max. 1 mm). determine
Note
2025