Adjusting The Door Window Angle In The Vehicle's Longitudinal Direction; Adjusting The Door Window Height - Porsche 996 TT Repair Manual

Note
• The bottom edge of the window must rest on the screw during adjustment.
3. Tighten the clamping jaws after completing the adjustment.
Tightening torque: 8.5 Nm (6 ftlb.)
top of page
Adjusting the door window angle in the vehicle's longitudinal
direction
Driver
1. Adjust to equalise the angle of the door window on the clamping jaws of the driver (upwards or
downwards).
Adjustment range 10 mm
2. Tighten the clamping jaw after completing the adjustment
top of page

Adjusting the door window height

1. Adjust the upper limit stops of the drivers by screwing the Torx screw T30 in or out with socket E6
in or against the direction of travel.
Adjustment range approx. 15 mm
2. Adjust the drivers so that they meet the upper limit stops at the same time.
Note
Fitting the door window in the clamping jaws
einordnung
1466