Removing antenna amplifier
•
Remove the respective trim of the A−pillar ' 7, 705719 Removing and installing A−pillar trim
1. Disconnect the antenna plugs for the windscreen −1− and −2− .
2. Disconnect the plug connections for the antenna control module −3, 4− left side, −3, 4, 5− right
side.
3. Unscrew the two fastening screws −6− .
top of page
Installing antenna amplifier
1. Position the antenna amplifier on the A−pillar and screw the fastening screws −6− tight.
2. Connect the plug connections for the antenna control module −3, 4− left side, −3, 4, 5− right
side.
3. Connect the antenna plugs for the windscreen −1− and −2− .
•
Install the respective trim of the A−pillar ' 7, 705719 Removing and installing A−pillar trim
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651
Removing antenna amplifier
einordnung
1748